BSMFN - 92385 SEALICONE CLEAR PRESSURE 7 1/4 OZ

  • MSDS: BSMFN
  • Manufacturer: PREMIER INDUSTRIAL CORP
  • Product Name: 92385 SEALICONE CLEAR PRESSURE 7 1/4 OZ
  • National Stock Number: 8030-00F030930
Product Identification

Product ID:92385 SEALICONE CLEAR PRESSURE 7 1/4 OZ
MSDS Date:02/20/1990
FSC:8030
NIIN:00F030930
MSDS Number: BSMFN

Responsible Party
PREMIER INDUSTRIAL CORPORATION
4500 EUCLID AVE.
CLEVELAND, OH 44103-3736
US

Emergency Phone: 216-391-8300

Info Phone: 216-391-8300

Cage: 18399

Contractor
PREMIER FARNELL CORPORATION
CLEVELAND, OH 44103-3736 US

Telephone: 216-391-8300

Cage: 18399

Ingredients

NON-HAZARDOUS FOR INGREDIENTS

Fraction By Weight: 1%


SILICA DIOXIDE, CRYSTALLINE QUARTZ, SAND (SUSPECTED HUMAN

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 30%

OSHA PEL 0.1 MG/CUM

ACGIH TLV: 0.1 MG/CUM RESP DUST


SILICON DIOXIDE, CELITE 322

CAS: 7631-86-9

RTECS: VV3100000

Fraction By Weight: 5-10%

OSHA PEL 80 MG/CUM

ACGIH TLV: 0.2 MG/CUM


DIMETHYL SILOXANE),

CAS: 63148-62-9

RTECS: JT6484500

Fraction By Weight: 58%


METHYL-TRIS-(METHYL ETHYL KETOXIMO) SILANE, 2-BUTANONE,

CAS: 22984-54-9

Fraction By Weight: 5%


PIGMENT

Fraction By Weight: 1%


0.83 LBS/GAL;99.4 GRAMS/LITER;0.06 GRAMS

RTECS: 9999999VO

Fraction By Weight: 9.75%

Hazards

LD50 LC50 Mixture:LC50 (MAN): >0.3 MG/CUM
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: IRRITATION. EXPOSURE NOT
POSSIBLE UNDER NORMAL.
Explanation of Carcinogenicity:SEE INGREDIENTS.

First Aid

First Aid:EYES: IMMEDIATELY FLUSH W/PLENTY OF WATER FOR 15 MINS. SKIN:
WASH THOROUGHLY W/PLENTY OF WATER & SOAP. INHALATION: REMOVE TO
FRESH AIR. INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL
ATTENTION IN AL L CASES.

Fire Fighting

Flash Point:>200F/93C
Extinguishing Media:WATER, FOG, FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING EQUIPMENT.
Unusual Fire/Explosion Hazard:DIRECT SUNLIGHT, FIRE, OR HEAT MAY CAUSE
BURSTING.

Accidental Release

Spill Release Procedures:VENTILATE AREA. CLEAN UP W/ABSORBENT MATEIRAL.
CONTAIN & PICK UP WASTE MATERIALS, PUT IN A SEALED APPROVED
CONTAINER.

Handling

Handling and Storage Precautions:KEEP IN COOL PLACE. USE ONLY IN WELL
VENTILATED AREAS. AVOID PROLONGED OR REPEATED CONTACT W/SKIN. DON'T
TAKE INTERNALLY. KEEP AWAY FROM CHILDREN.
Other Precautions:ALWAYS READ & FOLLOW DIRECTIONS ON PRODUCT LABEL. FOR
PROFESSIONAL & INDUSTRIAL USE ONLY.

Exposure Controls

Respiratory Protection:WEAR APPROVED RESPIRATORY EQUIPMENT.
Ventilation:LCOAL: RECOMMENDED. MECHANICAL: REQUIRED.
Protective Gloves:SOLVENT RESISTANT
Eye Protection:GOGGLES
Supplemental Safety and Health

Chemical Properties

Vapor Pres:66
Vapor Density:>1
Spec Gravity:1.3
Evaporation Rate & Reference:(BU AC = 1): >1
Solubility in Water:INSOLUBLE
Appearance and Odor:TRANSLUCENT PASTE, SLIGHT MEDICINAL ODOR.
Percent Volatiles by Volume:5

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:IGNITION SOURCES, DIRECT SUNLIGHT
Hazardous Decomposition Products:CO, NITROGEN OXIDES, SILCONE DIOXIDE,
CO2

Disposal

Waste Disposal Methods:DISPOSE OF WASTES ACCORDING TO LOCAL, STATE, &
FEDERAL REGULATIONS. DON'T PUNCTURE, INCINERATE (OR BURN)
CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.